Workflow with adhesive CC Expanding Sealer.

CC Expanding Sealer consists of fine porous foam as compressed to a thickness of 2 mm. Cut the sealer in proper length and place into the gap between the frame and the side piece. After 1-3 hours the strip expands to its full thickness of 30 mm.

Att körna en adjufix hylsa med CC-Fönsterdrev

Tipps trix CC-Fönsterdrev

Tipps trix CC-Fönsterdrev

Workflow with adhesive CC Expanding Sealer.

1. Clean the parts. Mount the CC Expanding Sealer.

2. If the parts are greasy, clean with appropriate cleaner.Then attach CC Expanding Sealer.

Swipe or click with the arrow keys to see the different steps in the installation instructions.

Approval 01/05/98
CC Expanding Sealer should be protected from moisture and UV-light with a list or sealants. The inside must be protected with a diffusion proof sealant or SITAC approved tape. Would some moisture afterall penetrate, there is no living organisms in the CC Expanding Sealer, it is humic-free, meaning that it can not possibly mold.